Shuttle SN27P2

Review Pages

1. Introduction
2. Full specifications
3. The Package
4. A Look Inside
5. Installation
6. bios
7. Everest Ultimate Edition 2006 - SiSoft Sandra
8. PCMARK - 3DMARK
9. Science Mark - PovRay - Nero Digital
10. CINEBENCH -SuperPI
11. Overclocking
12. Conclusion

	Chassis P2-type aluminum chassis, color: black storage bays: 1 x 5.25", 3 x 3.5" (2 hidden) stealthed drive doors Power and Reset buttons at the front and Clear CMOS button at the backpanel dimensions: 32.5 x 22 x 21 cm (LWH)
	Mainboard Shuttle FN27, Shuttle form factor, proprietary design for SN27P2 chipset: NVIDIA nForce 570 Ultra MCP (Codename: MCP55-Ultra) Dimensions: 20.5 x 28 cm
	Power supply SilentX 400 Watt mini PSU with switch, supports 100~240 VAC, PFC connectors: ATX Main Power and 12V Power EMI Certified: CE, FCC, C-Tick, BSMI Safety Certified: UL, TÜV, CB, BSMI
	Processor support Socket AM2 supports AMD Athlon™ 64, Athlon™ 64 FX, Athlon™ 64 X2 and Sempron Single- and Dual-Core processors (Rev. F) with DDR2 interface 1 GHz system bus with 2000MT/s Hyper-Transport link
	Processor cooling Shuttle I.C.E. (Integrated Cooling Engine) advanced Heatpipe technology three cooling zones, linear fan control, 4-pin fan connector
	Memory support 4 x 240 pin slots supports DDR2-800/667 memory modules max. 2 GB per DIMM up to a total size of 8 GB Dual Channel memory controller, supports unbuffered RAM
	Power Management compatible with ACPI Revision 2.0 and PCI PMI 1.1 Power On Suspend (POS) or ACPI S1 support Supend to RAM (STR) or ACPI S3 support Suspend to Disk (STD) or ACPI S4/S5 support Supports C0, C1, C2 and C3 states
	Expansion Slots 1x PCI-Express 16X, supports Dual-Slot graphics cards 1x PCI (32 Bit)
	8-channel audio 7.1 + 2 HD channel Audio Codec (Realtek ALC882) High-performance 103dB playback SNR quality Playback sampling rates up to 192 kHz Analog: line-out (8-ch), line-in, microphone, CD-in, AUX Digital: optical SPDIF-in/out, coaxial SPDIF-out
	Gigabit LAN Controller Integrated Gigabit Ethernet network controller with Marvell® 88E1116 PHY With NVIDIA Hardware Firewall (supports IPv4 and IPv6) Supports 10 / 100 / 1.000 MBit/s opteration Supports power saving mode
	Firewire Controller IEEE1394 Firewire controller VIA VT6307 With 2 Firewire connectors (front and rear) Supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate Compliant with 1394 OHCI specification revision 1.0
	Drive connectors 4 x Serial-ATA 3Gb/s (300 MB/s, 3 GBit/s) 3 internal and 1 external port connectors Supports MediaShield™ RAID with support for Raid 0, 1, 0+1, 5 and JBOD Supports Native Command Queuing (NCQ) and Tagged Command Queuing (TCQ) 1 x IDE ATA 133 drives 1 x floppy disk drive
	Front Panel connectors Microphone Headphone (Line-out) 2x USB 2.0 IEEE1394a Firewire (Mini port, 4 pol.) Power and Reset buttons
	Back Panel connectors 6x USB 2.0 IEEE1394a Firewire (6 pin) Serial-ATA 3 GBit/s (eSATA connector for external storage device) Gigabit LAN (RJ45) 8-ch Audio line-out (2x rear/front, bass/center, surround/back) Line-in SPDIF: optical in/out, coaxial out CMOS button Optional Wireless LAN module
	Other onboard connectors 2 x USB 2.0, 1x5 pins each (total 10x) 1 x AUX audio in 4 x fan connectors (4 pins each)
	Accessories Multilanguage XPC User Guide XPC driver CDROMs for 32bit and 64bit operating system Shuttle Extras CDROM (Software) RAID Installation Guide and RAID driver floppy disk I.C.E. Technology CPU heat-pipe Cables for FDD, IDE ATA133, Serial-ATA Power cord Screws pack and heatsink compound