PIONEER DVR-S706 DVD±R/RW recorder - Page 13

PI/PO quality results for DVD+R/RW

In the following screenshots you can see the PI/PIF scans for the DVD+R/RW media we burned with the Pioneer DVR-S706. The software we used for all measurements is the KProbe v2.1.0, and the reader is the LiteOn LDW-811S with "HS0Q patched" firmware, being able to read DVD±R/RW media up to 8X CAV. All scans have been performed at 8X with PI/PIF Sum8. Note that LiteOn drives cannot report PO but PIF errors, despite what KProbe reports. In addition, all discs have been scanned with PX-712A v1.01 using PlexTools v2.14 for comparison levels.

Comparing the KProbe/PlexTools scans we can see major differences in the reported PI/PIF error rates. The main explanation is that we have two different readers, with different pickup/chipset combinations, scanning at different reading speeds (8X CAV for KProbe, 2X CLV for PlexTools). It's interesting to see the disc scanned at low & high speed, since when error rate increases at a specific disc area, it should appear in both scans...else it would be, perhaps, a reading glitch of the tested reader.

Note: PI/PIF errors only give us a quick look at the error rate of the burned media. Those scans should be taken not as the absolute criteria of the burning quality but as an indication level.

• CMC Magnetics 8x DVD+R

• Traxdata 8x DVD+R

• MMore 4x DVD+R

• Plextor 8x DVD+R

• Mitsubishi Chemicals 4x DVD+R

• Traxdata 4x DVD+RW

The drive showed good writing quality, combined with good performance and compatibility with all the DVD+ media we used.

- Appendix