In order to test the writing quality and readability of the burned media we used two readers with two software applications:

• The LiteON SOHD-167T with patched firmware being able to read DVD5 up to 16X CAV and DVD9 up to 10X CAV. For the transfer rate tests we used the latest Nero CDSpeed version.
• The Plextor PX-716A with the latest available firmware. For scanning the disc, we used the latest PlexTools version at 2X CLV reading speed, BURST mode, with middle accuracy.

In general, a "perfect" disc should have a smooth reading curve, very low PIE/POE and zero (0) POF error rates. Most times however, even though a disc has very low PIE/POE error rates, the reading curve may not be smooth containing dropoffs. Due to the fact that we oversped the reading capabilities of the LiteON SOHD-167T, such drops are expected, especially near the outer area of the disc.

The measurements below should be taken not as the absolute criteria of the burning quality, but as an indication level.

16X DVD+R Writing Speed

• TY 8X DVD+R @ 16X

• TDK 16X DVD+R @ 16X

• TDK 8X DVD+R @ 16X

• Ricoh 16X DVD+R @ 16X

• Philips 16X DVD+R @ 16X

• Optodisc 16X DVD+R @ 16X

• Maxell 16X DVD+R @ 16X

- Summary

It is not common to see such good results with DVD+R 16x media. All discs reported very low PI/PO error levels, and especially the Maxell 16x discs came up with the best quality scans. Worst results came with Optodisc 16x discs, but again, quality score was more than acceptable. In general, this burner proves to be a very good quality writer at 16x with both DVD-R and DVD+R media formats.