In order to test the writing quality and readability of the burned media we are using two readers with two software applications:

• The LiteON SOHD-167T with patched firmware being able to read DVD5 up to 16X CAV and DVD9 up to 10X CAV. For the transfer rate tests we used the latest Nero CDSpeed version.
• The Plextor PX-716A with the latest available firmware. For scanning the disc, we used the latest PlexTools version at 2X CLV reading speed, BURST mode, with middle accuracy.

In general, a "perfect" disc should have a smooth reading curve, very low PIE/POE and zero (0) POF error rates. Most times however, even though a disc has very low PIE/POE error rates, the reading curve may not be smooth containing dropoffs. Due to the fact that we oversped the reading capabilities of the LiteON SOHD-167T, such drops are expected, especially near the outer area of the disc.

The measurements below should be taken not as the absolute criteria of the burning quality, but as an indication level.

12X DVD+R Writing Speed

• CMC Magnetics 16X DVD+R @ 12X

• Ricoh (Rev. 3) 8X DVD+R @ 12X

• Ricoh (Rev. 4) 8X DVD+R @ 12X

- Summary

All media burned at 12x was read successfully by our LiteON reader, but unfortunately, CMC Magnetics 16x media could only be recorded at 12x. You can see that there are two revisions for RICOH media on the market with the same ID code. With both of these discs, quality scans were similar, but the new revision 4 discs are slightly better. In any case, there were no uncorrectable errors with any media we tested.