Corsair Dominator TWIN3X2048-1800C7DFG
3. Comparison with other DDR3 modules
Review Pages
The Corsair TWIN3X2048-1800C7DF G has the advantage to perform CL6 at DDR3-1600 and CL7 at DDR3-1800, therefore it has the advantage in all possible benchmarks. We wanted to compare the new memory modules with other DDR3 memory, so we used the following memory timings/cache latencies:
DDR3 comparison |
||||||
Memory Frequency |
Real Frequency |
Voltage |
FSB:RAM |
CPU x |
FSB |
CPU Speed |
DDR3 1067 CL5-5-5-15 (1T) |
533,50 |
1.80 |
1:2 |
9 |
267 |
2403 |
DDR3 1150 CL5-5-5-15 (1T) |
575,00 |
2.00 |
1:2 |
9 |
288 |
2592 |
DDR3 1250 CL5-5-5-15 (1T) |
625,00 |
2.10 |
1:2 |
9 |
313 |
2817 |
In all cases we used the same timings and the same CPU internal multiplier. All these tests were performed with the following Bios settings:
- AI overclocking: Manual
- CPU Ratio Manual: 9
- FSB Strap: Auto
- FSB Frequency: 266~313
- PCI Frequency: Auto
- DRAM Frequency Manual: Auto calculated from FSB:RAM (1:2) divider
- DRAM Command Rate Manual: 1T
- DRAM Timing Control Manual: 5-5-5-15
- DRAM Static Read Control: Auto
- DRAM Dynamic Write Control: Auto
- Transaction Booster: Auto
- Clock Over-charging mode: Auto
- CPU/PCIE Spectrum: Disabled
- CPU Voltage, CPU Voltage Reference, CPU Voltage Damper, CPU PLL Voltage, DRAM Voltage, FSB Termination Voltage, North Bridge Voltage, North Bridge Voltage Reference, South Bridge Voltage: Auto
Memset offers information about what exactly memory timings Asus P5K3 Deluxe has chosen:
All test results are showed below:
The Crucial DDR3-1600 seems to perform not only equal but better than Corsair DDR3-1800 in most Sisoft Sandra tests. Things seem to change in SuperPI, since SuperTalent had the lowest SuperPI 2M calculation time:
Lastly, in Science Mark, the Corsair DDR3-1800 achieved the highest performance