In order to test the writing quality and readability of the burned media, we used two readers with two software applications:

- The LiteON SOHD-167T with patched firmware being able to read DVD5 up to 16X CAV and DVD9 up to 10X CAV. For the transfer rate tests, we used the latest Nero CDSpeed version.

- The Plextor PX-716A with the latest available firmware. For scanning the disc, we used the latest PlexTools version at 2X CLV reading speed, BURST mode with middle accuracy.

In general, a "perfect" disc should have a smooth reading curve, very low PIE/POE and zero (0) POF error rates. Most times however, even though a disc has very low PIE/POE error rates, the reading curve may not be smooth containing dropoffs. Due to the fact that we oversped the reading capabilities of the LiteON SOHD-167T, such drops are expected, especially near the outer area of the disc.

The measurements below should be taken not as the absolute criteria of the burning quality, but as an indication level.

18X DVD-R Writing Speed

- Verbatim 16X DVD-R @ 18X

- Summary

This is the only DVD-R media that was burned at 18X. According to Plextools, the error level and count are relatively low. However, CDSpeed produced a somewhat unsteady graph towards the end, at about the same point that we see POE in the Plextools scan.