Samsung SH-S203D

Review Pages

1. Introduction
2. CD,DVD reading tests
3. CD error correction tests
4. DVD error correction tests
5. CD-R Writing tests - Ritek 48x
6. CD-R Writing tests - Verbatim 48x
7. CD-R Writing tests - CMC Magnetics 48x
8. CD-RW Writing tests - Verbatim 32x
9. The DaTARIUS DVD Analyzer R 2x
10. DVD+R Writing tests - CMC MAG E01
11. DVD+R Writing tests - DAXON AZ3
12. DVD+R Writing tests - PRODISC R05
13. DVD+R Writing tests - RICOHJPN R03
14. DVD+R Writing tests - MCC 004
15. DVD+R Writing tests - Yuden T03
16. DVD+R DL Writing tests - MKM 003
17. DVD-R Writing tests - PRODISC F02
18. DVD-R Writing tests - TTH02
19. DVD-R Writing tests - RITEK F1
20. DVD-R Writing tests - CMCMAG AM3
21. DVD-R Writing tests - MCC 03RG20
22. DVD-R Writing tests - TYG03
23. DVD-R DL Writing tests - MKM 03RD30
24. DVD-RW Writing tests - MKM01RW6X01
25. DVD+RW Writing tests - MKM A03
26. DVD writing quality summary, Bitsetting
27. Final words
28. DVD-R DL Writing tests - MKM 04RD30

OPTODISC R16 000 (00h) DVD+R

-Media Info

- Writing - 6x (6.03x average) in 10:09min

- Reading - 12X (9.03X average)

- Writing Quality - Almedio AEC-1000

No uncorrectable errors were found and the correctable ones were under limit. Nice burning quality.

- About Almedio AEC-1000

The AEC-1000 consists of a DVD Drive and the "ALChecker" error measurement application which can check the written data quality. The application is capable of 1X CLV measurement as well as 4X CLV on DVD-Video/ROM and finalized DVD+R/-R media.

There are three measurement modes:
Fine Mode: checks a series of eight consecutive ECC blocks,
Rough Mode: checks eight consecutive ECC blocks every 100h ECC blocks
Quick Mode: checks three specified areas

The checking status is shown graphically in real time while you can save the error graph at the end of the test. The reported errors are the PI and the UncPO. In the case of PI, it counts the number of rows corrected by the PI error correction in each group of eight consecutive ECC blocks. In the case of UncPO, it counts the number of ECC blocks in which more than one byte is uncorrectable in eight consecutive ECC blocks. For our quality scans, we set for 1X CLV and Fine Mode which is the slowest and with the safest results. Also, we chose to measure all the media burned at the maximum available writing speed.