TDK 882N
9. Writing Quality Tests - 3T Jitter Tests
Review Pages
2. Transfer Rate Reading Tests
3. CD Error Correction Tests
4. DVD Error Correction Tests
5. Protected Disc Tests
6. DAE Tests
7. Protected AudioCDs
8. CD Recording Tests
9. Writing Quality Tests - 3T Jitter Tests
10. Writing Quality Tests - C1 / C2 Error Measurements
11. DVD Recording Tests
12. KProbe/PlexTools Scans - Page 1
13. KProbe/PlexTools Scans - Page 2
14. DVD+R DL - Page 1
15. DVD+R DL - Page 2
16. BookType Setting / Firmware Version changes
17. Conclusion
TDK 882N Recorder - Page 9
Writing Quality Tests - 3T Jitter Tests
On this page we present the 3T Pit & Land Jitter graphs when using various media burned at 40X CAV writing speed.
- 3T Pit results
Excellent performance by the TDK 882N at this point. The highest 3T Pit jitter reached was 29nsec, which is far below the Red Book limit (35nsec). Best results were achieved with SKC 52X CD-R media. The 882N looks to be a great quality recorder, just as the ND-2510A was.
- 3T Land results
Again, the average 3T Land results were also low. The maximum 3T Land Jitter reached 32nsec with Maxell 48X media and TY 48X CD-R media produced the best results. Excellent performance from the TDK 882N.
Since CD writing strategies were not changed with the firmware this drive uses, these results were to be expected. According to all the above graphs, the 882N drive produced great results with various media. It should be noted that all discs were recorded at maximum supported speed.
Review Pages
2. Transfer Rate Reading Tests
3. CD Error Correction Tests
4. DVD Error Correction Tests
5. Protected Disc Tests
6. DAE Tests
7. Protected AudioCDs
8. CD Recording Tests
9. Writing Quality Tests - 3T Jitter Tests
10. Writing Quality Tests - C1 / C2 Error Measurements
11. DVD Recording Tests
12. KProbe/PlexTools Scans - Page 1
13. KProbe/PlexTools Scans - Page 2
14. DVD+R DL - Page 1
15. DVD+R DL - Page 2
16. BookType Setting / Firmware Version changes
17. Conclusion