CDSpeed/PlexTools Scans - Page 4

In order to test the writing quality and readability of the burned media we used two readers with two software applications:

• The LiteON SOHD-167T with patched firmware being able to read DVD5 up to 16X CAV and DVD9 up to 10X CAV. For the transfer rate tests we used the latest Nero CDSpeed version.
• The Plextor PX-712A with the latest available firmware. For scanning the disc, we used the latest PlexTools version 2.18 at 2X CLV reading speed, BURST mode, with middle accuracy.

In general, a "perfect" disc should have a smooth reading curve, very low PIE/POE and zero (0) POF error rates. Most times however, even though a disc has very low PIE/POE error rates, the reading curve may not be smooth containing dropoffs. Due to the fact that we oversped the reading capabilities of the LiteON SOHD-167T, such drops are expected, especially near the outer area of the disc.

The measurements below should be taken not as the absolute criteria of the burning quality, but as an indication level.

16X DVD+R Writing Speed

• TDK 16X DVD+R @ 16X

• Verbatim 16X DVD+R @ 16X

• Taiyo Yuden DVD+R @ 16X

- Summary

At 16X writing speed, the rotation speed and the drive vibrations are higher than at all other speeds. We expected to see worse results than the above, but were pleasantly surprised to see such good scans at 16X writing speed. The MP5316DA produces excellent quality discs. Quality scans indicate even better writing quality than with -R media format.